2001-2003 Raptor 660 one way starter clutch
Raptor 660 One Way Starter Clutch is for those or you that already have gaskets and bolts. It is strongly recommended that you replace the bolts on your one-way for a new install. This product has a LIFETIME WARRANTY against manufactures defects! Please make sure the surface this clutch rides on is in good condition....its a bearing surface!
Frequently asked questions:
What is the difference between L&L Extreme products and the other guys? The L&L Extreme clutch has superior quality and materials, 100% built in the USA, a LIFETIME WARRANTY and you can call us seven days a week.
How do I know if I have to replace the 52 tooth gear?
Your Raptor has a 52 tooth gear that the one way rides on...sometimes the race (bearing surface) gets damaged by the stock one way. Its not a good idea to put a new One Way on a 52 tooth gear if its shows signs of damage. (scaring, galling or out of tolerances) If that looks good your Raptor starting problems can be fixed without replacing the 52 tooth gear. A rule of thumb: If your clutch failed on your gear you need to replace both or your warranty could be denied.
Whats the difference between the 01-03 and the 04-05? The 2001-2003 Raptor one way is the most common unit to fail. Both units have one spring that goes around the entire unit to engage the clutch. The 01-03 have a smaller diameter inner diameter (two inches) The 04-05 hub is closer to two and a quarter inches. Check your VIN number and see what the tenth digit is. If its a 1 you are a 2001....if its a 4 your Raptor is a 2004. Look on the frame under the foot-peg on the left side.
How can you offer a LIFETIME WARRANTY? Its simple, they don't fail! We are dedicated 100% to making your riding experience trouble free.
If you have any questions call 503-484-8711
Thanks for reading!